Repair Lane

Hub Assembly Replacement

Replace a worn bolt-on wheel hub assembly to eliminate humming, looseness, and ABS warning lights at that corner.

Difficulty: moderate~12 hrs1–2 hours
Estimated total
$195–700
Parts$80–350
Labor$115–350
Labor time12 hrs
Get matched with a shop
What's involved

What this repair actually is.

The hub assembly is the bolt-on unit the wheel mounts to; on most modern vehicles it contains the bearing and the ABS wheel-speed sensor in one sealed piece. When it wears, you get a hum or growl that changes with speed and sometimes an ABS light. We unbolt the old assembly from the knuckle, disconnect the axle and sensor, and install a new unit torqued to spec.

Symptoms

How you can tell.

  • Humming or growling that changes with speed
  • Noise that changes when you swerve gently left or right
  • ABS or traction control warning light
  • Play or wobble in the wheel when raised
  • Uneven tire wear on one corner
If you delay

A failing hub bearing gets louder and looser until the wheel can wobble dangerously, and it can also ruin the CV axle it supports.

Educational estimate. Real pricing depends on your vehicle, the inspection, parts availability, taxes, and shop rates. Use this as a guide while you shop quotes.
Related

Often done together.