Repair Lane

Brake Line Repair

A rusted or damaged steel brake line is repaired or replaced with new line, then the system is bled and pressure-checked so your pedal is solid again.

UrgentDifficulty: hard~13.5 hrs2 hours to half a day
Estimated total
$135–745
Parts$20–130
Labor$115–615
Labor time13.5 hrs
Get matched with a shop
What's involved

What this repair actually is.

Steel brake lines run the length of the car carrying brake fluid under pressure, and road salt eventually rusts through them. We locate the failed section, fabricate and install new line with proper flares and fittings, then bleed the system and verify full pedal pressure. This is one of the most common sudden brake failures on older northeast cars.

Symptoms

How you can tell.

  • Brake pedal suddenly went soft or to the floor
  • Puddle of brake fluid under the car
  • Red BRAKE light on with low fluid in the reservoir
  • Visible rust flaking on the lines under the car
  • Failed inspection for corroded brake lines
If you delay

A rusted line can rupture without warning and take out that brake circuit instantly — this is a repair to do now, not later.

Educational estimate. Real pricing depends on your vehicle, the inspection, parts availability, taxes, and shop rates. Use this as a guide while you shop quotes.
Related

Often done together.