Repair Lane

ABS Wheel Speed Sensor Replacement

A failed wheel speed sensor is replaced so your ABS, traction control, and stability control come back online and the warning lights turn off.

Difficulty: moderate~0.51.5 hrsAbout an hour per sensor
Estimated total
$85–425
Parts$25–160
Labor$60–265
Labor time0.51.5 hrs
Get matched with a shop
What's involved

What this repair actually is.

Each wheel has a small sensor that tells the ABS computer how fast that wheel is spinning. When one fails or its wiring corrodes, the ABS and traction control shut off and the dash lights up. We confirm which sensor is bad with a scan tool, replace it, and verify the system reads all four wheels correctly.

Symptoms

How you can tell.

  • ABS and traction control lights on together
  • Speedometer acting erratically
  • ABS engaging or buzzing at low speed on dry pavement
  • Traction control cutting power for no reason
  • Failed inspection for an ABS light
If you delay

With ABS disabled the wheels can lock in a panic stop or on wet pavement, and the lit warning light is an automatic NY inspection failure.

Educational estimate. Real pricing depends on your vehicle, the inspection, parts availability, taxes, and shop rates. Use this as a guide while you shop quotes.
Related

Often done together.